50G微波網絡分析儀N5230C操作說明

網絡分析儀的操作規范：50G微波網絡分析儀N5230C操作說明
1，使用者要愛護儀器，確保儀器的文明使用
2，使用過程中要確保佩戴防靜電手鐲
3， 使用過程中不得接觸儀器的內芯（含連接線纜）
4， 使用過程中不允許工作臺有較大的震動。
5，使用過程中不得隨意切斷電源，造成儀器的不正常關機，不能頻繁開關機
6，使用射頻線纜時不要用力過大，確保電纜保持一定的弧度，用畢線纜接頭上加接頭頂蓋
7，旋接接頭時，要旋接頭的螺套，盡量確保內芯不旋轉
8，盡量協調，少用校準件，校準件用畢必須放回器件盒
9，轉接件用畢應加蓋放回盒子中
10，停用時必須關機，關閉穩壓電源，方可打掃為生
11，無源器件調試必須佩戴干凈的手套
概述：本說明書主要為無源器件調試而作，覆蓋了無源器件調試所需的矢量網絡分析儀基本功能，關于矢量網絡分析儀的其他更進一步的使用，請參考儀器的使用說明書
本說明以N5230C網絡分析儀為例，對于其他型號的網絡分析儀，操作步驟基本一致，只是按鍵有菜單稍有區別。

N5230C PNA-L 微波網絡分析儀

• 300 kHz 至 6/13.5/20 GHz 和 10 MHz 至 20/40/50 GHz
• 2 端口或 4 端口，具有兩個內置信號源
• 110 dB 系統和 122 dB 接收機動態范圍，32,001 個測量點，32 通道
• < 0.006 dB rms（選件 22x）
• 測量速度：每點 4 至 9 ?s
  
  

注：截至 2013 年 11 月 30 日，N5230C 停止生產。替代產品是 N523xA PNA-L 系列。

PNA-L 網絡分析儀的設計可滿足您的通用網絡分析需求，且價格在您的預算之內。

• 300 kHz 至 6 GHz，2 端口
• 300 kHz 至 13.5 GHz，提供 2 端口和 4 端口型號
• 10 MHz 至 20 GHz，提供 2 端口和 4 端口型號
• 10 MHz 至 40 GHz，2 端口
• 10 MHz 至 50 GHz，2 端口

N5230C直觀的操作方式可簡化測量和加快測量速度
PNA-X 提供 10.4 英寸觸摸屏、采用下拉式菜單的簡單界面、硬鍵和功能鍵，以及在線幫助。

2-Port PNA-L Microwave Network Analyzer N5230C 300 kHz to 6, 13.5 GHz 10 MHz to 20, 40, 50 GHz

This is a subset of technical specifications for the Keysight Technologies, Inc. N5230C network analyzer. To view or print the N5230C technical specifications, visit our web site at find/pnal This N5230C document provides technical specifications for the following calibration kits and ECal modules only: 85052B, 85056A, 85032B, N4691A, and N4693A. Please download our free Uncertainty Calculator from find/na_calculator to generate the curves for your calibration kit and PNA setup. Definitions All specifications and characteristics apply over a 25 °C ±5 °C range (unless otherwise stated) and 90 minutes after the instrument has been turned on. Specification (spec.): Warranted performance. Specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions. Characteristic (char.): A performance parameter that the product is expected to meet before it leaves the factory, but that is not verified in the field and is not covered by the product warranty. A characteristic includes the same guardbands as a specification. Typical (typ.): Expected performance of an average unit which does not include guardbands. It is not covered by the product warranty. Nominal (nom.): A general, descriptive term that does not imply a level of performance. It is not covered by the product warranty. Calibration: The process of measuring known standards to characterize a network analyzer's systematic (repeatable) errors. Corrected (residual): Indicates performance after error correction (calibration). It is determined by the quality of calibration standards and how well "known" they are, plus system repeatability, stability, and noise. Uncorrected (raw): Indicates instrument performance without error correction. The uncorrected performance affects the stability of a calibration. Standard: When referring to the analyzer, this includes no options unless noted otherwise.

N5232A PNA-L 微波網絡分析儀,20 GHz
N5231A PNA-L 微波網絡分析儀,13.5 GHz
N5230A PNA-L 網絡分析儀, 2 端口,高達 6, 13.5, 20, 40, 或 50 GHz網絡分析儀
網絡分析儀
N5231B PNA-L 微波網絡分析儀，13.5 GHz
網絡分析儀
N5234B PNA-L 微波網絡分析儀，43.5 GHz
網絡分析儀
N5235B PNA-L 微波網絡分析儀，50 GHz
N5232B PNA-L 微波網絡分析儀，20 GHz
PNA系列網絡分析儀：
E8362B PNA 系列網絡分析儀，10 MHz 至 20 GHz
E8363B PNA 系列網絡分析儀, 10 MHz至 40 GHz
E8364B PNA 系列網絡分析儀, 10 MHz 至 50 GHz
E8362A FNA 系列網絡分析儀，45 MHz 至 20 GHz
E8363A PNA 系列網絡分析儀，45 MHz 至 40 GHz
E8364A PNA 系列網絡分析儀，45 MHz 至 50 GHz
E8361A PNA 系列網絡分析儀，45 MHz 至 67G GHz
E8362C PNA 微波網絡分析儀
E8363C PNA 微波網絡分析儀
E8364C PNA 微波網絡分析儀
E8361C PNA 微波網絡分析儀