HDTV Cameras
KP-HD1005
HDTV
HD-SDI
1/3"
1 CMOS 800 TV Line
64(W) × 63(H) ×
135(D) mm
Power over coaxial
DC type
1080 30P
KP-HD1005-S2 1080 30P
KP-HD1005-S4 1080 59.94i/50i/29.97p/25p
KP-HD1005-S5 1080 59.94i/50i/29.97p/25p
KP-HD1001 AC type 1080 30P
KP-HD20A 44(W) × 44(H) ×
59(D) mm
Power over coaxial
DC type
1080 59.94i/50i/29.97p/25p
KP-HD20A-S2 1080 59.94P/50P
KP-HD1001, KP-HD1005,
KP-HD1005-S2
KP-HD20A, KP-HD20A-S2
JHD-SDI output
An HD-SDI output provides a non compressed full bandwidth high quality
video signal with a low latency of 17ms or less.
JCoaxial cable transmission
A standard 75 ohm coaxial cable of up to 100 meters is used for the HD-SDI
output, allowing the use of existing coaxial cable.
JCapable of transmitting up to 300 m by the Multiunit use
(Except KP-HD1005-S4/-S5
It is capable of transmitting up to 300m by HD-VLC transmission mode of the
Multiunit use.
JMulti-format support (KP-HD1005-S4/-S5, KP-HD20A)
1080·59.94i/50i/30p/25p
JWide dynamic range (KP-HD1001, HD1005/-S4/-S5)
Display cleanly also large image of luminance difference.
JAdaptive noise reduction (KP-HD1001, HD1005/-S4/-S5)
Bright HDTV color images can be obtained with just 0.3 lx —up to 64-time integration enables night time photographing. In addition, adaptive noise reduction makes it easy to shoot moving objects.
JCan be output in four systems of video formats by using the
Multiunit (except for the MU-HD104-S1).
JPower over coaxial using the Multiunit (except KP-HD1001)
Possible because coaxial over power supply, wiring with a single coaxial cable
is possible when using Multiunit.
JHigh Sensitivity
With a high sensitivity of 0.2 lx (0.4 lx for KP-HD20A-S2) Minimum Illumination, also enables monitoring of the installation environment that was difficult
to look like a dark place of the production line. The black-and-white mode
switching in KP-HD1005/-S4/-S5 and KP-HD1001, it is capable of highsensitivity photography of 0.02 lx in black-and-white movie. In addition, it is
possible to increase sensitivity of up to 30 times by using accumulation function in KP-HD1005/-S4/-S5 and KP-HD1001.
KP-HD1001 KP-HD1005 KP-HD1005-S4
KP-HD1005-S5 KP-HD1005-S2 KP-HD20A
KP-HD20A-S2
Imaging device 1/3-inch CMOS
Total pixels 2010(H) x 1108(V) 2.2 M pixels
Effective pixels 1944(H) x 1092(V)
Sync system Internal
Video output
SMPTE 292M Compliance (HD-SDI Standard mode)
HD-VLC: Require the Multiunit for transmission ? HD-VLC: Require the Multiunit for transmission
Analog output: VBS ? Analog output: VBS
Output Format HD-SDI output：1080 30p HD-SDI output：
1080 59.94i/50i/29.97p/25p HD-SDI output：1080 30p 1080 59.94i/50i/29.97p/25p
KP-HD20A-S2: 1080p 59.94/50
VBS: NTSC, PAL ? VBS: NTSC, PAL VBS: NTSC,PAL
Transmission distance
HD-SDI Standard mode: Max. 100m (5C-FB 75 )
HD-VLC mode: Max. 300m (5C-2V 75 /When using
the optional Multi-unit)
HD-SDI Standard mode:
Max. 100m (5C-FB 75 )
HD-SDI Standard mode: Max. 100m (5C-FB 75 )
HD-VLC mode: Max. 300m (5C-2V 75 /When using the optional Multi-unit)
S/N 50 dB (AGC: OFF / Weight: ON)
Horizontal resolution 800 TV lines
Minimum illumination
Color: 0.2 lx 30 times accumulation: 0.007 lx
B & W: 0.02 lx 30 times accumulation: 0.0007 lx
(F1.2, AGC 48 dB, 3200K)
Color: 0.2 lx
(F1.2, AGC 48 dB, 3200K)
Colo: 0.2 lx
(F1.2, AGC 48 dB, 3200K)
(KP-HD20A-S2: 0.4 lx)
AGC OFF/Auto (Max. 48 dB) / Manual (0 dB to +48 dB, 1 dB step)
Accumulation Mode Max. 30 times ?
Electric shutter OFF/Auto (AES) / Manual (1/30 to 1/14000 second)
OFF/Auto (AES)/ Manual (1/30
to 1/14000 second (KP-HD20AS2: 1/60 to 100000 second)
Wide dynamic range OFF/ WDR WDR: Double shutter sampling ?
)MAGEQUALITYADJUSTMENT Level / Gamma / Color level / Black level / Detail
Backlight correction OFF/ ON (Photometry area can be set)
Auto iris lens output DC/VIDEO
White balance Auto: ATW / AWC / Manual (2500K to 10000K)
Remote control RS-232C ? RS-232C
Lens mount C-/CS- C-: C-mount Adaptor use
Power supply AC 100 V to 12 V DC ±10%, Power over coaxial from multi-unit
Power Consumption Approx. 11 W (AC 100 V) Approx. 7.5 W
(Power over coaxial)
Approx. 7.8 W
(Power over coaxial)
Approx. 4 W
(Power over coaxial)
Approx. 5.9 W
(KP-HD20A-S2: Approx. 4.7 W
(Power over coaxial)
Ambient
Temperature
Operating –10 to +50 ?C (+14 to +122 ?F), 30 to 80 % RH
Storage –20 to +60 ?C (–4 to +140 ?F), 20 to 90 % RH
Shock endurance Less than 29.6 m/S2, 10 to 55 Hz XYZ axis for each 30 minutes)
External dimensions 64 x 63 x 135 mm (excluding lens and protrusions) 64 x 63 x 103 mm (excluding
lens and protrusions)
64 x 63 x 135 mm (excluding
lens and protrusions)
44 x 44 x 59 mm (excluding
lens and protrusions)
Mass Approx. 750 g (excluding lens) Approx. 550 g (excluding lens) Approx. 400 g (excluding lens) Approx. 550 g (excluding lens) Approx. 200 g (excluding lens)
25
KP-HD1005-S4, KP-HD1005-
|
在線咨詢 
