亚洲综合在线播放_久久视频免费在线_久久久黄色av_亚洲免费视频一区

PUR熱熔膠復合機 環保型服裝面料復合機詳細介紹

江蘇鑫利龍智能機械有限公司是***生產銷售各式復合機械的實力廠家！

手機（微信）13851340306   朱先生

有客戶上來就問你們廠生產的復合機多少錢一臺？

這讓我如何回答你，起碼告訴我你是復合什么材料，用什么膠水，門幅多寬，需要哪些配置。

這樣我才能知道你需要哪種復合機，哪些配置適合你！我才能給你報價啊，才***~

你要是想購買到***，又***的復合機械，可以到江蘇鑫利龍看看！

我們承諾每款機器出廠前必須要經過您的試樣才能夠出廠 

我們的售后承諾：一年保修，終身維護，定期提示保養

這就是我們的***，我們的品牌。以客戶至上，為客戶帶來“***，價格優”的復合機械！

一、PUR熱熔膠復合機用途：

該機使用無溶劑環保型PUR熱熔膠，能貼合布+布，布+薄膜等各種市場所需的復合材料。復合成品具有環保***、粘合性及柔軟性均佳、耐高低溫、濕氣反應后不易受溫度影響、彈性持久、***、耐油、抗老化等特點。此外PUR有***的霧面效能，低析出物質及中性顏色特征，可應用于須重復消毒的醫療產品上。用PUR熱熔膠復合機復合的成品具有更低的損耗率和更高的水洗牢度。PUR熱熔膠復合機可完全取代傳統溶劑型貼合設備，生產全程不使用易燃易爆及有毒的溶劑型膠水，工廠無安全隱患，符合國家安監部門的安全要求；可使***生產工人遠離溶劑對身體的危害，復合成品無溶劑殘留，完全符合出口環保標準，具有極大的社會效益。

二、PUR熱熔膠復合機構造：

PUR熱熔膠復合機設備操控采用可編程式PLC設計及人機界面控制，操作人性化，維護簡便，無張力放料裝置，搭配加熱循環系統，方便控制膠水溫度升降及穩定度，貼合材料及成品可依需要采用中心卷取或表面選取方式，上膠方式分為點膠及網紋涂布兩種選項。

三、 PUR熱熔膠復合機特點:

1、所用PUR熱熔膠不含溶劑，是理想的綠色環保膠水；

2、制品無殘存溶劑，生產***排放問題，節省能源，占地面積小；

3、復合的過程濕固反應，不可逆，粘合牢固耐水洗牢度好；

4、PUR熱熔膠不含水和溶劑，無需烘干，復合速度快；

5、粘性強，用膠量省，節省成本；

6、復合過程全聯動控制，基材無拉伸，質輕柔軟，手感好；

7、熱源為油熱，加熱快，熱量均勻；

8、熔膠系統獨立出來，熔膠充分速度快；

9、點狀網紋上膠，成品透氣度好，立體感強；

10、機臺人性化設計，節省操作人員；

11、兼具小量多樣化的生產設計，節省成本，數位化的控制系統，使操作性更為良好。

12、網（圓）點輥紋路分多種選擇，紋形大小及深淺可依客戶不同要求量身訂制。

四、PUR熱熔膠復合機技術參數：

1、工作布寬：1600-2300mm

2、機械輥寬：1800-2500mm

3、設計線速：5-45 m/min

4、機械外形尺寸(長*寬*高)：8300×3300×3200 mm

5、導熱油加熱溫控：可調熱油循環200℃(MAX)

6、機械總功率：約40KW

7、電力供應：380V 50Hz 三相

8、設備總重：約7500KG

One, PUR hot melt adhesive composite machine use:

The machine uses solvent-free environment-friendly PUR hot melt adhesive, which can be applied to all kinds of composite materials such as cloth, cloth, cloth and film. The composite products have the characteristics of non toxic environmental protection, good adhesion and softness, high and low temperature resistance, and wet gas reaction, not easily affected by temperature, durable elasticity, wear resistance, oil resistance, aging resistance and so on. In addition, PUR has excellent fog surface efficiency, low precipitation and neutral color characteristics, and can be applied to repeated disinfection of medical products. The finished product with PUR hot-melt compound machine has lower loss rate and higher washing fastness. PUR hot melt adhesive compound machine can completely replace the traditional solvent type bonding equipment. The whole process does not use flammable, explosive and toxic solvent type glue. There is no safety hazard in the factory. It meets the safety requirements of the national safety supervision department. The environmental protection standard of the mouth has great social benefit.

Two, PUR hot melt adhesive composite structure:

PUR hot melt adhesive complex machine equipment control adopts programmable PLC design and man-machine interface control, operation humanization, easy maintenance, tension free feeding device, collocation heating cycle system, convenient control of rubber temperature rise and fall and stability, the bonding material and finished product can be used in the middle heart coiling or surface selection method, sizing Party It is divided into two options: dot glue and reticle coating.

Three, PUR hot melt adhesive machine features:

1. The PUR hot-melt adhesive is free of solvents and is an ideal green glue.

2, the product has no residual solvents, produces no pollution emission problems, saves energy and occupies a small area.

3. The process of composite solid reaction is irreversible, strong adhesion and good washing fastness.

4. PUR hot melt adhesive does not contain water and solvent, no need to dry, and compound speed is fast.

5, strong stickiness, save cost by using glue.

6. The composite process is controlled by linkage. The substrate is non stretched, light and soft, and feels good.

7, the heat source is the oil heat, the heating is fast, the heat is uniform.

8. The melt system is independent, and the melt adhesive is fast enough.

9. Dot dot reticulate glue, finished product breathability is good, stereo feeling is strong;

10, the humanized design of the machine, save the operator;

11, both small and diverse production design, cost saving, digital control system, so that the operation is better.

12, net (round) point roller texture is divided into several choices, the size and depth of the shape can be customized according to the different requirements of customers.

Four, PUR hot melt adhesive composite machine technical parameters:

1. The width of the work cloth: 1600-2300mm

2, the width of the machine roll: 1800-2500mm

3. Design line speed: 5-45 m/min

4, mechanical dimensions (length * width * height):8300 x 3300 x 3200 mm

5. The highest temperature control of heat conducting oil: adjustable hot oil circulation at 200 degrees (MAX).

6. Total mechanical power: about 40KW

7, power supply: 380V 50Hz three-phase

8. Total weight of equipment: about 7500KG