調直機說明

主要技術參數：

The main technical parameters:

產品的性能與特點：

Product performance and features:

1，本機適用于鐵線、不繡鋼線、鍍鋅線、鋁線、水（粉）抽線等金屬線材的調直切斷。

1. This machine is suitable for wire, stainless steel wire, galvanized wire, aluminum, water (powder) draw lines and other metal wire straightening and cutting.

2，如需調直方線，扁線等異形線，請聯系本公司訂制。

2. To straighten party lines, flat lines, contour lines, please contact the company ordered.

3, 送線輪、切刀等采用優質合金鋼，并通過真空熱處理，耐磨性強，使用壽命延長。調直塊可采用鑄鐵、合金、塑料王等，所有軸類部件全部采用40CR或45#鋼，并經調直處理，齒輪則全部采用鍛坯，經高直及齒面高頻淬火，硬度高達HRC55-58度。

3. Sending wire wheel, such as the use of high-quality steel cutter and vacuum heat treatment, wear resistance, longer life. Straightening block can be cast iron, alloys, plastics Wang, all shaft parts are all 40CR or 45 # steel, and after straightening process, the gear is used in all forging billet, straight and tooth surface by high frequency hardening, hardness up HRC55-58 degrees.

4, 調直軸與高直壓輪將線材在切斷前調直，送線壓緊手柄調節送線壓緊輪，使線材能均勻送進，調直軸是產品形成的關鍵所在，通過調直軸上的調直塊和調直固定來調整產品的水平垂直，使之符合要求。調節壓緊手柄，使線材更加水平垂直和使線材生產速度增減。最后調節槍桿上的白鋼刀，使產品長度符合要求。

4, straight shaft with high pressure wheel straight before cutting the wire straightening, wire feeding pressing the pinch roller lever to adjust wire feed, the wire can even feed, direct modulation axis is the key product formed by direct modulation straightening blocks and tone straight shaft fixed to adjust the horizontal and vertical products to conform to requirements. Adjusting the pressing handle, the wire and the wire is more horizontal and vertical production rate increase or decrease. Finally, adjust white blades gun on the length of the product to meet the requirements.

5,速度快，工作性能穩定，操作簡單。

5. Fast, stable performance, simple operation.

6, 本產品為本公司完全自方研發，經國內外上千家用戶，十多年的使用檢驗，已是一款完全成熟的產品。