|
<\/p> 專業廠家<\/span> <\/span>產品質量可靠<\/span><\/span><\/p>可加工定制<\/span> <\/span>發貨速度快<\/span><\/span><\/p>...................................................................................................................................................................................................................................<\/span>.<\/span><\/span><\/p><\/p>
<\/p>
<\/p> <\/p> ..........................................................................................................................................................................................................................<\/span><\/span><\/span>
<\/span><\/strong><\/span><\/p> <\/p> <\/strong><\/span><\/p> <\/p> 此機型為海鐳激光的第三代燒焊機產品，廣泛用于修模服務及機械零件修補，可補焊多種模具材料：S136<\/span>、<\/span>NAK80<\/span>、<\/span>718<\/span>、<\/span>738<\/span>、<\/span>P20<\/span>、<\/span>SKD-11<\/span>、<\/span>SKD-61<\/span>、<\/span>H13<\/span>、<\/span>W302<\/span>、<\/span>GS2344<\/span>、<\/span>GS2343<\/span>、<\/span>GS2080<\/span>等各國模具鋼材。焊后不會產生裂痕、沙孔。焊后硬度可達<\/span>HRC60°<\/span>硬度。 <\/span><\/span><\/p>激光焊模具修補原理：<\/span>
<\/span>激光模具燒焊機是痛過瞬間產生的高熱能降專用焊絲熔接到模具的破損位置，與原有基材牢固熔接，焊后經電火花、磨削等加工成光面，從而修補模具。<\/span><\/p>產品優點：<\/span>
<\/span>1、全新設計，高品味外觀<\/span><\/span>
<\/span>2、激光頭可上下、前后、左右移動，上下和左右可自動移動，適合大型模具，可操作性大大提高。<\/span><\/span>
<\/span>3、激光光路與電源控制系統獨立設計，方便移動，適合各種場地各種模具的修補。<\/span><\/span>
<\/span>4、加強型自動精密工作臺，可選上下電動控制、無級調速。工作臺水平方向采用滾珠絲杠，焊接大型模具時，工作臺操作可輕松自如的移動，且具有很高精度和穩定性大。<\/span><\/span>
<\/span>5、激光控制對激光電源波形進行精密控制，系統對不同材質預置了優化波形值。只要選擇對應的材質，就能焊出**的效果。<\/span><\/span>
<\/span>6、熱影響區域小，不會導致精密儀器變形、焊接深度大、焊接牢固、溶化充分、不留修補痕跡、熔池溶料凸起部分與基體結合處無凸陷現象。<\/span><\/span><\/p>觀察系統：<\/span>
<\/span>配帶十字光標的專用顯微鏡觀察系統，放大倍數17.5X<\/span>。十字光標中心與激光光斑中心對齊（用戶可調整）。帶有高速電子濾光保護裝置，保護作業者眼睛不被激光傷害，緩解操作者眼睛疲勞，提高工作效率。<\/span><\/span><\/p>控制系統：<\/span>
<\/span>采用改進型內置單片機進行雙閉環精密控制。其穩定性和運行能力遠遠優于同類產品采用的小微機加控制卡。<\/span><\/p>氣體保護系統:<\/span><\/span>
<\/span>改為雙通道同步氬氣保護系統，使氬氣保護更好，焊接效果更加牢固，美觀。同時保持了原有優點--<\/span>與激光發射同步控制，可以**地節約氬氣。<\/span><\/span><\/p>安裝條件及耗材：<\/span>
<\/span>220伏<\/span>50HZ<\/span>交流電，提供<\/span>30<\/span>安以上電流（<\/span>6<\/span>平米線），電壓穩定。<\/span><\/span>
<\/span>環境：干凈無灰塵或灰塵較少，溫度：55° F<\/span>（<\/span>13℃<\/span>）<\/span>to 82°F<\/span>（<\/span>28℃<\/span>），濕度：<\/span>5% to 75% <\/span>不結露。<\/span><\/span>
<\/span>主要耗材：<\/span>氙燈、濾芯、保護鏡片、水、焊絲、氬氣、電<\/span><\/p>配套設備：<\/span>
<\/span>冷水機、加強型工作臺、激光焊絲、焊絲夾<\/span><\/p>應用領域<\/span><\/p>廣泛用于修模服務及機械零件修補，可補焊多種模具材料：S136<\/span>、<\/span>NAK80<\/span>、<\/span>718<\/span>、<\/span>738<\/span>、<\/span>P20<\/span>、<\/span>SKD-11<\/span>、<\/span>SKD-61<\/span>、<\/span>H13<\/span>、<\/span>W302<\/span>、<\/span>GS2344<\/span>、<\/span>GS2343<\/span>、<\/span>GS2080<\/span>等各國模具鋼材。焊后不會產生裂痕、沙孔。焊后硬度可達<\/span>HRC60°<\/span>硬度。<\/span><\/span><\/p>性能參數<\/span><\/p>型號模具燒焊機 HL-M-W200<\/span><\/span>
<\/span>最大激光功率（W<\/span>） <\/span>200W<\/span><\/span>
<\/span>激光波長（um<\/span>） <\/span>1.064<\/span><\/span>
<\/span>單脈沖最大能量 90J<\/span><\/span>
<\/span>激光焊接頻率（HZ<\/span>） <\/span>0.5-40<\/span><\/span>
<\/span>激光焊接深度（mm<\/span>） <\/span>0.1-3.5<\/span><\/span>
<\/span>脈沖寬度（ms<\/span>） <\/span>0.5-20<\/span><\/span>
<\/span>光斑尺寸（mm<\/span>） <\/span>0.2-2<\/span><\/span>
<\/span>激光焊絲（mm<\/span>）<\/span>0.2-0.8<\/span><\/span>
<\/span>工作臺 加強型自動工作臺，可選電動工作臺<\/span>
<\/span>整機功率 ＜11KW<\/span><\/span>
<\/span>電源要求 單相220 15% VAC ..50Hz 40A <\/span>以上<\/span><\/span><\/p>樣品參示<\/span><\/p><\/span><\/p>
|
在線咨詢 
