亚洲综合在线播放_久久视频免费在线_久久久黄色av_亚洲免费视频一区

The Vanguard DIGITMR S2 is an inexpensive, easy to use digital circuit breaker analyzer. The DIGITMR S2 can be operated stand-alone or can be computer-controlled. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact and motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). Timing results are recorded and displayed on the 240 x 128 pixels back-lit LCD screen and can also be printed on the built-in 4.5" wide thermal printer.

• Stand-alone, microcomputer-driven EHV Circuit Breaker Analyzer
• Analyzes contact time, stroke, velocity, over-travel, and contact wipe
• USB PC interface
• USB Flash drive interface
• Can store up to 200 test records and 100 test plans
• Built-in thermal printer

DigiTMR S2	Cables
Cable Part Number [8000-0005] USB Cable [ 6' (1.83m) ] 8000-0005 [8000-0016] Power + Ground Combination Cable 8000-0016 [8000-0095] Contact Extension Cable [ 30' (9.14m) ] 8000-0095 [8000-0096] Contact Test Lead [ 20' (6.10m) ] 8000-0096 [8000-0097] Contact Extension Cable [ 30' (9.14m) ] 8000-0097 [8000-0099] Initiate Cable [ 22' (6.71m) ] 8000-0099 [8000-0101] Test Lead (Trigger, V1, V2) [ 2' (0.61m) ] 8000-0101 [8000-0104] Transducer Cable [ 25' (7.62m) ] 8000-0104

DigiTMR S2	Technical Specifications
TYPE portable digital circuit breaker analyzer  PHYSICAL SPECIFICATIONS 18.5”W x 14”H x 7”D (47.0 cm x 35.7 cm x 17.6 cm); Weight: 20 lbs (9.1 kg)  INPUT POWER 3 Amps, 100 – 240 Vac, 50/60 Hz  DRY-CONTACT INPUTS 3 dry-contact channels; each channel detects main contact and insertion resistor contact  TIMING WINDOWS 1-second, 10-seconds, or 20-seconds  TIMING RESOLUTIONS ±50 micro-seconds @ 1-second duration, ±500 micro-seconds @ 10-second duration, ±1.00 milli-second @ 20-second duration  TIMING ACCURACY 0.05% of reading ±0.1 ms @ 1-second duration CONTACT DETECTION RANGE Closed: less than 20 ohms; Open: greater than 5,000 ohm  RESISTOR DETECTION RANGE 50 – 5,000 ohms  TRIGGER INPUT VOLTAGE Open/Close: 30 – 300V, DC or peak AC  VOLTAGE SENSING INPUT RANGE V1: analog input; 0 – 255V, DC or peak AC; Sensitivity: ±1V V2: voltage presence/absence detector input; 30 – 300V, DC or peak AC  BREAKER OPERATIONS Initiate Open, Close, Open – Close, Close – Open, Open – Close – Open  BREAKER INITIATE CAPACITY 30A, 250 Vac/dc max  INITIATE CURRENT READING RANGE One, non-contact, Hall-effect sensor, 0 – 20 amp range, dc to 5Khz  TRAVEL TRANSDUCER INPUT 1 digital travel transducer channel; Linear range: 0.0 – 60.0 in (±0.005 in.); Rotary range: 0 – 360 degrees (±0.006 degrees)  CONTACT TRAVEL POINT DIFFERENCE Measures “slow-close” contact-point distances; results can be printed CT CURRENT SENSOR One, non-contact, 0 – 100A  DISPLAY Back-lit LCD screen (240 x 128 pixels); viewable in bright sunlight and low light levels PRINTER Built-in 4.5-inch wide thermal printer can print both graphic contact travel waveforms and tabulated test results INTERNAL TEST RECORD STORAGE Stores up to 200 test records and 100 test plans  COMPUTER INTERFACES One USB port, optional Bluetooth interface  PC SOFTWARE Windows?-based Vanguard Circuit Breaker Analysis (VCBA S2) software is included with purchase price. Software updates available at no additional charge.  SAFETY Designed to meet UL/IEC 61010 and CAN/CSA C22.2 No. 1010.1-92 standards  ENVIRONMENT Operating: -10°C to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F)  OPTIONS Transportation case (available for the DigiTMR S2 and the travel transducers)  WARRANTY One year on parts and labor Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).