亚洲综合在线播放_久久视频免费在线_久久久黄色av_亚洲免费视频一区

The DMOM-600 is specifically designed for testing EHV circuit-breaker contact resistances, bushing contact joints, welding joints, or for any low-resistance measuring application. This high current and very lightweight (33 lbs/ 15 Kg) micro-ohmmeter is designed to meet the IEEE C57.09-1999 (5.15) requirement for testing circuit breaker contact resistance.

The DMOM-600 can accurately measure resistance values from 1 micro-ohm to 5 ohms. A 0.1 micro-ohm resolution is possible with current greater than 5A. The DMOM-600 applies a selectable true DC test current from 10A to 600A to the resistance load to be tested. The DMOM-600 controls the test current’s rise and fall rates. The test current rise and fall rate can be selected from 5 seconds to 10 seconds. An “Auto Test” mode is also available and can be initiated simply by applying the sense cables’ leads across the two points of interest in the current path. This feature is very convenient when measuring a sequence of several resistance values in a circuit breaker contact. The DMOM-600 can also compare test results against preset limits and determine if a test passed or failed, and a “Pass” or “Fail” flag is displayed accordingly.

• Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
• Stores test records on-board or on external USB Flash drive
• 10 to 600A programmable test current
• Built-in 2.5" wide thermal printer

DMOM-600	Cables
Cable Part Number [8000-0147] Hand Spike Cable Set 8000-0147 [8000-0201] Pistol Grip Sensing Probe Set 8000-0201

DMOM-600	Technical Specifications
TYPE Portable micro-ohmmeter PHYSICAL SPECIFICATIONS Dimensions: 16.8" W x 12.6" H x 12" D (42.7cm x 32cm x 30.5cm) Weight: 33 lbs (15 Kg) INPUT POWER 100 – 240 Vac, 50/60 Hz RESISTANCE READING RANGE 1.5 milliohms at 600A to 450 milliohms at 10A Typical Accuracy: ±(0.15% of reading + 0.15% FS) at test current of 10-600A TEST CURRENT RANGE 10 Ampere to 600 Amperes (selectable in 1A steps); Thermally protected DC power supply. DISPLAY Back-lit LCD (128 x 64 pixels), viewable in direct sunlight and low light levels KEYPAD Rugged, 44-key "QWERTY" membrane keypad INTERNAL TEST RECORD STORAGE 128 test records. Each record can contain up to 64 readings. EXTERNAL TEST RECORD STORAGE Up to 999 test records on external USB Flash drive COMPUTER INTERFACE RS-232C PRINTER Built-in 2.5" wide thermal printer PC SOFTWARE  Windows-based analysis software included with purchase price SAFETY Designed to meet IEC 61010 (1995), UL 61010-a, and CAS-C22.2 standards ENVIRONMENT Operating: -10?C to 50?C (15?F to +122?F) Storage: (-30?C to 70?C (-22?F to +158?F) HUMIDITY (MAX) 90% RH @ 40? C (104? F) non-condensing ALTITUDE (MAX) 2000m (6562 ft) to full safety specifications CABLES 15 ft (4.6 m), #1 AWG test cables, power cord, ground cable OPTIONS Shipping case, C-Clamp set, Hand Spike Set WARRANTY One year on parts and labor Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).