梯形背貼式橡膠止水帶
背貼式橡膠止水帶以天然橡膠與各種合成橡膠為主要原料，摻加各種助劑及填充料，經塑煉、混煉、壓制成型，其品種規格較多，有橋型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。背貼式橡膠止水帶根據使用情況又可分類為中埋式橡膠止水帶和背貼式橡膠止水帶。該止水材料具有良好的彈性，耐磨性、耐老化性和抗撕裂性能，適應變形能力強、防水性能好，溫度使用范圍為-45℃-＋60℃。當溫度超過70℃，以及橡膠止水帶受強烈的氧化作用或受油類等有機溶劑侵蝕時，均不得使用橡膠止水帶。
Back stick type rubber waterstop with natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, type, type H, E type Q type. According to the usage, the back - up rubber waterproof belt can be classified as the embedded rubber water stop belt and the back - mounted rubber water stop belt. The sealing material has good elasticity, abrasion resistance, aging resistance and tear resistance to deformation ability, good waterproof performance, temperature range of -45 DEG C -60 C. Rubber seals shall not be used when the temperature is above 70 degrees, and the rubber sealing strips are strongly oxidized or eroded by organic solvents such as oils.
背貼式橡膠止水帶作用與原理
Function and principle of back mounted rubber water stop belt
背貼式橡膠止水帶是利用橡膠的高彈性，在各種荷載下產生彈性變形，從而起到堅固密封，有效地防止建筑構造的漏水，滲水并起到減震緩沖作用。在許多工程建筑設計中，土建、水土結構之間都有一定的伸縮要求，并存在防水防震等問題，因此采用和安裝橡膠止水帶是有效地解決以上種種問題的手段。本產品主要用于混凝土現澆時設在施工縫及變形縫內，與混凝土結構成為一體的基礎工程、地下設施、隧道涵洞、輸水渡槽、擋水壩等，確保工程建設的使用壽命。
Back mounted rubber water stop is a kind of high elasticity made of rubber, which produces elastic deformation under various loads, so as to achieve strong sealing, effectively prevent leakage of building structure, seepage and play a role of shock absorption and buffering. In many engineering architectural design, there are certain requirements between the telescopic construction, soil structure, and there are problems such as waterproof and shockproof, so using and installing the rubber sealing strip is effective means to solve these problems. This product is mainly used in concrete cast-in-place construction joints and deformation joints, and foundation engineering, concrete structure has become one of the underground facilities, tunnel, culvert aqueduct, dam etc., to ensure the construction of service life.
背貼式橡膠止水帶技術標準
Technical standard for back bonded rubber water stop
我公司生產的背貼式橡膠止水帶是采用國家標準GB18173.2-2000《高分子防水材料止水帶》組織生產的。 因此我們可以按用戶要求生產各種形狀、尺寸的橡膠止水帶，另外還為不同工程、不同部位的需要備有十字型，丁字型、斜度型和內外轉角型產品，可適用于任何設計要求。在止水帶產品在運輸時，應避免陽光直射，勿與熱源、油類及有害溶劑接觸。成品應取直平放，勿加重壓。存放場所最好保持-10℃－+30℃，相對濕度在40%－80%。背貼式橡膠止水帶適用范圍：應用于地下構筑物、水壩、貯水池、游泳池、屋面以及其他建筑物質和構筑物的變形縫防水。
Our company produced the back type rubber waterproof belt is the use of national standard GB18173.2-2000 "polymer waterproof material water stop" organization production. Therefore, we can according to the production of various shapes and sizes of the rubber sealing belt to user requirements, but also for different parts of engineering, preparation of a cross, T-shaped, slope type and internal and external rotation type products, can be applied to any design requirements. When the water stop belt is in transportation, it should avoid direct sunlight, and do not contact with heat source, oil and harmful solvents. The finished product should be straight and flat, without heavy pressure. The best places to keep -10 +30 stored C C, relative humidity in 40%80%. The application scope of back bonded rubber water stop is applied to the deformation joint waterproof of underground structures, dams, storage tanks, swimming pools, roofs and other building materials and structures.
在線咨詢 
