| 產品參數 | | 品牌 | TENACC | | 產品特性 | ***POM | | 是否進口 | 否 | | 產地 | 日本 | | 廠家(產地) | 日本旭化成 | | 牌號 | HC460 | | 銷售方式 | 品牌經銷 | | 品名 | POM | | 加工級別 | 注塑級 | | 特性級別 | *** | | 產品規格 | 25KG/包 | | 可售賣地 | 全國 | | 類型 | 標準料 | | 高硬度POM TENAC-C HC460日本旭化成 Density / Specific Gravity | 1.41 | g/cm3 | ASTM D792,?ISO 1183 | Melt Mass-Flow Rate (MFR)?(190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 | Molding Shrinkage - Flow | 1.6 to 2.0 | | Internal Method | Water Absorption?(24 hr, 23°C, 50 RH) | 0.20 | | ASTM D570 | | Hardness | Nominal Value | Unit | Test Method | Rockwell Hardness |
|
| ASTM D785 | M-Scale | 88 |
|
| R-Scale | 117 |
|
|
| Mechanical | Nominal Value | Unit | Test Method | Tensile Modulus | 2750 | MPa | ISO 527-1 | Tensile Stress |
|
|
| Yield | 66.0 | MPa | ISO 527-2 | -- | 64.0 | MPa | ASTM D638 | Tensile Elongation?(Break) | 40 | | ASTM D638,?ISO 527-2 | Flexural Modulus | 2600 | MPa | ASTM D790,?ISO 178 | Flexural Strength | 88.0 | MPa | ASTM D790 | | Impact | Nominal Value | Unit | Test Method | Charpy Notched Impact Strength | 7.0 | kJ/m2 | ISO 179 | Notched Izod Impact | 83 | J/m | ASTM D256 |
.jpg)
|
在線咨詢 
