亚洲综合在线播放_久久视频免费在线_久久久黄色av_亚洲免费视频一区

12v65AH免維護SEHEY西力蓄電池NPG65-12太陽能UPS電源EPS直流屏

以下為行業信息，非廣告內容，請選擇性觀看：

西力蓄電池的安裝及接線操作步驟

1）將金屬安裝工具用絕緣膠帶包裹，進行絕緣處理；

2） 行蓄電池之間的連接，然后再將蓄電池組與充電器或負載連接；

3）多組電池并聯時，遵循先串聯后并聯的接線方式；

4）為 較好的散熱條件，各列蓄電池間距保持在10mm以上；

5）連接前，擦凈電池端子，使其呈現金屬光亮；

6）連接前后，在蓄電池極柱表面敷涂適量防銹劑；

7）蓄電池安裝完畢，測量電池組總電壓無誤后，方可加載上電。

Installation and wiring steps of Xili battery

1) Wrap the metal installation tool with insulating tape for insulation treatment;

2) Connect the batteries first, then connect the battery pack to the charger or load;

3) When multiple sets of batteries are connected in parallel, follow the wiring method of series connection first and then parallel connection;

4) To ensure good heat dissipation conditions, the spacing between each battery column should be maintained at least 10mm;

5) Before connecting, clean the battery terminals to make them appear metallic bright;

6) Before and after connection, apply an appropriate amount of rust inhibitor to the surface of the battery pole;

7) After the installation of the battery is completed and the total voltage of the battery pack is measured without any errors, it can be loaded and powered on.