|
六、硬件特色功能介紹： Six, hardware features: |
|||||
|
序號 NO. |
特色功能簡介 Feature and function introduction |
||||
| 1 |
智能燈光,燈光(平行底光,同軸光)大角度垂直光,環光,底角度水平光)，共分三環八區，可以變換各種角度和亮度,滿足不同產品的需求. Intelligent lighting, lighting (parallel bottom light, coaxial light) large Angle vertical light, ring light, bottom Angle horizontal light), a total of three rings and eight regions, can change a variety of angles and brightness, to meet the needs of different products. |
||||
| 2 |
光源無需開關，直接在電腦中控制光源強弱，不會有開關元器件的損耗； The light source does not need to be switched, and the strength of the light source is controlled directly in the computer, without the loss of the switching components; |
||||
| 3 |
探針預留孔：我司儀器硬件上有探針預留孔位，如需要加探針的客戶，我們可以將探針裝在儀器上，加探針后可以測量高、寬、長度、兩面的夾角、圓錐的頂角、圓柱的直徑、倒角、直線度、平面度、圓度、圓柱度、垂直度、平行度、傾斜度等。 Probe reservation hole: There is a probe reservation hole on the hardware of our instrument. If you need to add a probe, we can install the probe on the instrument. After adding the probe, you can measure the height, width, length, Angle between two sides, top Angle of the cone, diameter of the cylinder, chamfer, straightness, flatness, roundness, cylindricity, perpendicularity, parallelism, inclination, etc. |
||||
|
七、軟件基本測量功能： Seven. Basic measurement functions of the software: |
|||||
| 1 |
基本測量：點、線、圓、弧、橢圓的測量； Basic measurement: point, line, circle, arc, ellipse measurement; |
||||
| 2 |
抄數：CV曲線、曲線、二維抄數 Copy: CV curve, curve, 2D copy |
||||
| 3 |
標注：半徑標注、直徑標注、角度標注、線性標注、對齊標注：文本標注：坐標標注 Annotation: radius annotation, diameter annotation, Angle annotation, linear annotation, alignment annotation: text annotation: coordinate annotation |
||||
| 4 |
幾何測量：兩圓弧頂點距離、兩直線的距離、垂直線、平行線、剪切直線、延長直線、兩線交點、線圓交點、兩圓交點、圓的切線、兩圓切線、兩線連接弧、角平分線 Geometric measurement: vertex distance of two arcs, distance of two lines, vertical line, parallel line, shear line, extension line, intersection of two lines, intersection of lines, intersection of two circles, tangent of a circle, tangent of two circles, connecting arc of two lines, Angle bisection line |
||||
| 5 |
輔助功能：復制、全選、刪除、移動、鏡像、旋轉 Auxiliary functions: Copy, select all, delete, move, mirror, rotate |
||||
| 6 |
坐標系：設置客戶坐標系、三點設定坐標系、坐標原點平移、坐標旋轉； Coordinate system: set customer coordinate system, three-point coordinate system, coordinate origin translation, coordinate rotation; |
||||
| 7 |
形位公差：平面度、直線度、同心度、垂直度、真圓度、位置度 Form and position tolerance: flatness, straightness, concentricity, verticality, roundness, position |
||||